|
1. RoboBlock
Basic2K4 Kit
EzLab is microcontroller for Basic lang
or GUI. it is easy products to control robots, electronic
parts and educational kit. you can use it easily
and make a program for robots. it is one in the
world
1. for win98. Win2000, Win NT, Win XP
2. you can make program using CONTROL ICON
3. it is one in the world
* MainBoard Module(Servo
Control Kit)
GuiBasic Servo controller is a AT90S2313 Microcontroller based Servo Motor
Controller board that accepts RS-232 Serial data
from a host computer and outputs PWM (Pulse-Width-Modulated)
signals to control up to eight RC(radio-controlled,
i.e. model airplanes, Cars, etc) Servo Motors. and
unused 8 servo motor ports and 3 I/O Port can be
configured as digital outputs for controlling on/off
devices. LED displays can be driven directly by
the pins but devices such as relays and
solenoids
may need a simple transistor driver circuit.
this
board has the added feature of being able to run
a standalone Basic Program stored on board an 8K
EEPROM.
Fig1.1 [Servo
Controller Board]
1) CPU: GuiBasic Lite is used by AT90S2313 cpu, this
Program for Basic Lang. is in this chip
Everyone can use this Program ( sample Program) with free but don't
make Products for it for sell
2) EEPROM: Downloading Memory for User Program. this
program is stored and you can rewrite program in
this Memory Chip.
3) Control Part : it is I/O Port, Servo Control
Port.
4) Voltage (VCC): +5V.
5) Ground(GND): 0V.
6) PORT : Input/Output Port is with 3 (I/00, I/01, I/02) in
this module, and Ports for Servo Motor is with 8
( SV0~SV7 ). you can control 8 Servo Motor
using this Module easily
7) Voltage Connector: Can Connect it with +5V from
Power Supply Device or Battery Cell .
8) Program DownLoading Port : you can download program
to module using DownLoading Cable
* Program - GuiBasic
This
Program is for GuiBasic Module, it is freeware Version.
you can download program(basic) to module using
this program
- GuiBasic Install Version
-
GuiBasic Lite
Version
- GuiBasic
User Manual
- Commands
Descriptions
- GuiBasic
HEX file Sourse
- GuiBasic
Module Circuit Schematic
- Basic
Program Sourse Example
 * DownLoading
Cable
Motor Controller board
can accepts RS-232 Serial data from a host computer
using this Downloading Cable.
Fig1.2 [DownLoading Cable and GuiBasic Module]
( $ 15 )
Fig1.1 [DownLoading
Cable Connecting with Module
|
