Robot Make 1
Robot Make 2
Robot Make 3
Robot Make 4
 
 


¡ÝHow to assembling Linetracer

 

 1. Check your partlist in your kit.

         

 2. Let's solder ¨çIC Socket U1,U2,U3,U4 ¨è condecer 104pF C4,C5,C6,C7 ¨é Cystal Y1
    ¨ê Capacitors 30pF C2,C3


            

3. Let's solder ¨çresistor 1K ohm R7, ¨è capacitor 10uF C1, ¨é2P connector Male J5,
  ¨êtoggle S/W SW, ¨ë buzzer BU1(check capacitor, buzzer polarity )



           
                           
±×¸²°°ÀÌ ³³¶«À» ÇϸéµÈ´Ù.


4. Let's solder ¨çLED D7,D8,D9, ¨èresistor 330ohm R8,R9,R10 ¨é2P connector male J3,J4.

             

                  



5. Let's solder ¨ç6P header pin female(J1,J2), ¨èbattery socket BOX1,BOX2,BOX3
  
        

      


6. Check a sensor board or partlist. solder ¨çresistor 1.2Mohm( R1,R2,R3) ,
    22omh(R4,R5,R6)

    


7. Let's solder ¨ç6P header pin female(J6,J7) ¨èIr-sensor ST-7L(D1,D2,D3)
   EL-8L(D4,D5,D6)
  
      
      


8. Connect sensor board with  main board using 2 header pin male(red spots).
   put IC chip in sockets.
            

9. Assemble DC motor with bolt or nuts and ball caster(red spot), wheels. ´Ù.

            


10.   Assemble
terminal as shown

            

           

11. Assemble supporter and nuts.

            
            


12. Assemble this robot with body base, main board, sensor board as shown

          

          


13. How to works
    Place linetracer on the black line of Track Board. the robot is thus informed of the place or is the line to follow
   The moving direction of it can be varied by the program ,  Make your program by your self ....¸ðµÎ°¡



 

Address :150-094, 4 floors 8-1,Mullae 4 Dong, YongdungpoGu, Seoul, South Korea / Phone : +82-2-597-8224, Fax : +82-2-2679-8557
Copyright(C) 2000, Roboblock System Co., Ltd, All Rights Reserved / E-Mail : WebMaster