Robot Make 1
Robot Make 2
Robot Make 3
Robot Make 4
 
 


The Producing procedure of the Arm Robot
 

 * Components List


1. Components list of the grip part

                           


2.Components list of the middle part

                


3. Rotary part and Base board          
 
      

 

 * Producing Procedure

1. Assembling of the grip part

     

    ㉠   Glue this part of the grip.

      

 ㉡   Don't screw these parts too tight.      

      

㉢   Attach the motor at the last and use the HS-81.

                                     
 ㉣   The wire shouldn't be too thin for the moving of the grip.

      

㉤   Glue the middle part and put it on the grip. 


2.Assembling of the middle part

      
  ㉠   Use the components in the motor.

  ㉡   HS-303 motor

  ㉢   Connect the grip part with the middle part.

  ㉣   Assemble them for the vertical and horizontal moving of the grip.

  ㉤   Put it at the center of the motor angle range then screw the bolt.

  ㉥   The support is used for fixing of the middle part.

      
  ㉦   They are the bottom part and moving on the contrary in the operating range.

  ㉧   This is for the connection with the bottom of the middle part and moving up and down with the the angle of the lower motor.    
      

 ㉨  Put it at the center of the motor angle range.

   ㉩  Fix it with the support.

   ㉪  Connection of the upper side and lower side of the middle part  /   Upper connection part

 3. Assembling of the base board and rotary part

   ㉠  USe the HS-303 motor

      

   ㉡  Fix the rotary board and the middle part into the iron construction.

   ㉢  Connect the lower part motor with the rotary board.

   ㉣  Connect the both of the parts for the duration of the frame weight.

      

    ㉤  Upper side of the connection part

    ㉥  The completed product only except the base board.

      

     ㉦   The completed product     

      

 

Address :150-094, 4 floors 8-1,Mullae 4 Dong, YongdungpoGu, Seoul, South Korea / Phone : +82-2-597-8224, Fax : +82-2-2679-8557
Copyright(C) 2000, Roboblock System Co., Ltd, All Rights Reserved / E-Mail : WebMaster